|
Green Archer, also called Radar, Field Artillery, No 8 was a widely used British mortar locating radar operating in the X band using a Foster scanner. Developed by EMI after an experimental model by the Royal Radar Establishment, it was in British service from 1962 until 1975 with the Royal Artillery.〔Wood〕 A self-propelled version was designated FV436 or Radar, FA, No 8 Mk 2. ==Concept== Mortars, using indirect fire, became a major threat to infantry in World War II. It was found that mortar bombs in flight could be detected and tracked by radar. US and UK anti-aircraft radars were used and specialised mortar locating radars appeared at the end of the war, and were used in Korea with varying degrees of success. Hostile mortars had to be accurately located before they could be attacked with indirect fire from guns or mortars. Since hostile mortars moved frequently to avoid return fire it was essential to have a means of locating them to a few tens of metres of accuracy and to be able to respond quickly when they are located. Previous radar systems used parabolic reflectors or similar systems to produce a narrow "beam" of radio energy rather like a flashlight beam. This beam was then swung around the sky by moving the entire reflector, with returns, or "blips", appearing on the displays when an object was caught in the beam. For tracking mortar shells this was a particularly difficult task, requiring the operator to have the antenna pointed in roughly the right location by estimates based on previous rounds, and then following the shell through its trajectory. Finding was made a bit easier if the beam cone had a large angle, the problem with this was that it reduced the accuracy of location. The key advance in tracking mortar shells was the Foster scanner, a type of radar antenna. Instead of producing a beam of radio energy, the Foster scanner produced a "fan" (pie-slice shape). A system of rotating waveguides caused the path from the magnetron transmitter to the antenna face to change in a continual pattern, causing the fan-shaped beam to "scan" rapidly back and forth. Any object in the scanner's view would appear on the display each time the fan crossed its horizontal bearing, producing a fix. The scanner could determine only one angle, however, some other system or operation was needed to measure a second angle and position the shell in space. Green Archer solved this problem by taking two measurements and moving the scanner between them. The scanner was built in a manner to produce a beam that was about 40° wide in azimuth and less than 1° high in elevation. The scanner was initially set so the beam was projected above the horizon, sweeping back and forth through a wide arc. When a mortar round was seen, the operator marked it on the radar display, and then pressed a button that raised the scanner so it was pointed at a higher vertical angle. This happened rapidly enough that the bomb would take some time to reach this higher altitude, at which point it would appear on the display again. The operator them placed cursors over the marks and input the plot to the radar’s analogue computer. These two plots, the time between them and the angle between the two beam positions gave two points on a parabolic curve. Such a curve is defined by two points and is a good approximation of a mortar bomb trajectory. Using these, the azimuth of the radar beam centre and the radar’s coordinates, the mortar position coordinates were calculated. These could be adjusted to reflect the actual height of the ground. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Green Archer (radar)」の詳細全文を読む スポンサード リンク
|